|
This hand fed 100 ltr mixed batch output mixer capable of a rate of 12 batches per hour giving a production output of more than 1 cubic mtr per/hr
The mixer is powered by an electric start yanmar L40/manual start lister diesel engines
The mixer is powered by an electric start yanmar L40/manual start lister diesel engines
Concrete Mixing Hints
MIX RATIOS based on old 50 kg bags
The correct mix ratio (cement:sand:stone) depends on the type of application; harder concrete requires more cement, rougher applications require more aggregate. The ratios given below are guidelines: best proportions may depend on the quality of sand/stone used.
First put in the water - around 7 litres (1½ gallons), using more or less depending on the type of mix required. Add some aggregate before adding cement, to avoid sticking. Work consistently to the ratio of ingredients for whatever type of concrete mix you are working to.
Most ordinary concrete 1:2:4 ½(25kg) bag cement,sand 35ltr,stone 70 ltr,and a 85 ltr output
Foundations 1:3:6 1/3 bag cement,sand 35 ltr,stone 70 ltr,for a 78 ltr output
Rough mass concrete 1:4:8 ¼ bag cement,sand 35 ltr,stone 70 ltr,for a 78 ltr output
GETTING A GOOD MIX
The approximate mixing time for concrete is 2-4 minutes from when all the material (including the water) has been added - over-mixing can reduce strength and cause segregation of the coarser aggregates.
Beware of low grade aggregates; these will only lead to trouble later on with sinking and frost spoiling the appearance of the pour.
Also do not get the concrete mix too wet as this can reduce strength and make it less able to withstand weathering.
Mixer capacity
160 ltr in and 110 ltr out = 5:3 1/2
3/4 bag or 3x25 kg bag capacity
1.5 full barrow loads
Restrictions: Can only be transported by lorry or trailer
See Also
240/110V 4/3 Belle Mini Mix
Petrol 4/3 Belle Mini Mix
Diesel 7/5 Winget electric start |
